Water heating
The most understandable method of calculation for the consumer is when the tariff for hot water is set per person or per cubic meter if the account is maintained by an individual meter. But for the bookkeeping and planners of the enterprise, the consumption in physical units is required: cubic meters for mutual settlements with the service of the water utility service (if water heating is included in the tariff) and Gcal for gas settlements. These quantities are related to each other through the rate of water flow per person and the rate of heat consumption for heating the cubic meter of water. The calculation methodology in the "BAS-Population" program depends on what is primarily regulated by a particular enterprise.
When calculating the amount of heating for water heating at the rate in the BAS-Population program, the following is taken into account:
The period of rendering the service for the supply of hot water.
Type of water consumption.
Breaks in the water supply.
Quality (deviation from the standard temperature).
Movement of people living in apartments.
All factors are considered in the relationship, with the imposition of up to one day.
When using individual meters, records are kept for each device separately. The correctness of the input of the accounting indications and the limit of the scale is monitored. Facilities are provided for accounting for the verification of meters and the calculation of quantities during verification.
The flow is distributed according to the calculated periods in proportion to the loads acting at different time periods. This allows you to more accurately provide information to the economists of the enterprise in terms of periods of time.
The readings of the metering devices are entered by the operators of the enterprise, they come with payments from banks, they are entered in the personal cabinet of the consumer on the site of the enterprise. It is possible to reverse or correct the indications of any period, and then the automatic recalculation of the accruals of the involved periods is performed.
The results of the calculation are given in money, cubic meters, Gcal.
Also, group meters are taken into account. The consumption of group meters is reduced by the total consumption of individual meters in the relevant period, and distributed among consumers in proportion to the load. At the same time, loads are taken into account by all factors that affect the calculation of the norm. The calculation is based on water use norms and the composition of the residents, or on the basis of the average expenditure for the previous period. After receiving actual accounting readings, the settlement is reversed and the actual consumption is used.
There is also a calculation of the amount consumed for common house needs and its distribution among consumers. The method of distribution depends on the specific application, on the decision of the local authorities, on the Homeowners Association, etc. This can be proportional to the loads, in proportion to the areas proportional to the established coefficients.
